SITEMAP | CONTACT

+86-13346677960


Product overview of TD type bucket elevator:
TD type bucket elevator according to JB3926-85 "vertical bucket elevator" standard design and manufacture, at present domestic commonly used bucket elevator are vertical type, more new. Bucket type lifting machine which is used in the vertical conveying powder, granular and small block mill cut smaller bulk materials, such as grain, coal, cement, crushed ore, enhance the height of the highest 40m. TD type bucket is equipped with four types of Q hoist (Qian Dou), H (arc bottom bucket), type ZD (deep bucket) SD (deep bucket).

Main features of TD type bucket elevator:
Driving power is small, the inflow type feeding, induced by unloading material, large capacity hopper intensive layout. The material lifting almost no feed back and dig material phenomenon and is therefore invalid less power.
2. Enhance the range, this type of hoist the kinds of materials, performance requirements, not only can improve the general powdery, granular materials and improve grinding Zhuo of larger material. Good sealing performance and less environmental pollution.
3 good operating reliability, advanced design principles and processing methods to ensure the reliability of the whole operation, no failure time more than 20 thousand hours. The lifting height is high, and the lifting machine runs stably, so the height of the lifting height can be achieved.
4. The use of long life, to enhance the inflow type feeding machine, without the need to use a bucket material, material rarely occur extrusion and collision phenomenon. This machine in the design to ensure the materials in the feeding and unloading is less scattered, reduces the mechanical wear.

Table of main technical parameters of TD type bucket elevator:
Model TD160 TD250 TD315 TD400
Hopper form Q h zD Sd Q h zD Sd Q h zD S d Q h zD Sd
Transport volume
(m³/h)
5.4 9.6 9.6 16 12 22 23 35 17 30 25 40 24 46 41 66
Bucket width
﹙mm﹚
160 250 315 400
Bucket capacity
﹙L﹚
0.5 0.9 4.2 1.9 1.3 2.2 3.0 4.6 2 3.6 3.8 5.8 3.1 5.6 5.9 9.4
Bucket distance
﹙mm﹚
280 350 360 450 400 500 480 560
bandwidth﹙mm﹚ 200 300 400 500
The speed of the bucket﹙m/s﹚ 1.4 1.6 1.6 1.8
Bulk material
﹙mm﹚
25 35 45 55
Model TD500 TD630 TD160 TD250 TD350 TD450
Hopper form Q h zD Sd h zD Sd Q S Q S Q S Q S
Transport volume
(m³/h)
38 70 58 92 85 89 142 4.7 8 18 22 25 42 50 72
Bucket width
﹙mm﹚
500 630 160 250 350 450
Bucket capacity
﹙L﹚
4.8 9 9.3 15 14 14.6 23.5 0.65 1.1 2.6 3.2 7 7.8 14.5 15
Bucket distance
﹙mm﹚
500 625 710 300 400 500 640
bandwidth﹙mm﹚ 600 700 200 300 400 500
The speed of the bucket﹙m/s﹚ 1.8 2 1 1.25 1.25 1.25
Bulk material
﹙mm﹚
60 70 25 35 45 55

Copyright©:BEST